How to Reset Oil Life on Honda Accord 2008 Onwards? Easily!

If you own a Honda Accord from 2008 onwards and need to How to Reset Oil Life on Honda Accord 2008 Onwards? don’t worry, it’s a simple process. Just follow these steps:

1. Start by turning the ignition to the “run” position, which is one position before starting the engine.
2. Look for the SELECT/RESET button and press it until the engine oil life indicator appears on the display.
3. Hold down the SELECT/RESET button for more than 10 seconds. You’ll notice that the engine oil life indicator and any maintenance codes will start blinking.
4. Keep holding the SELECT/RESET button, this time for more than 5 seconds. As you do this, the maintenance items codes will disappear, and the engine oil life will reset to 100%.
5. Finally, turn off the ignition and then start the engine again to make sure the indicator has been successfully reset.

It’s as simple as that! By following these steps, you’ll be able to reset the oil life indicator on your Honda Accord 2008 onwards model with ease.

How to Reset Oil Life on Honda Accord 2008 Onwards?

Step 1: Turn on the Ignition:

When it comes to resetting the oil life on a Honda Accord 2008 onwards, the first step is to turn on the ignition. This may sound simple, but it’s an essential starting point for the process. Let’s break it down into a few easy-to-follow paragraphs:

1. Position the ignition: Before starting the engine, make sure the ignition is in the “run” position. You’ll find this position just one step before actually starting the engine. Take a moment to locate it and ensure that you’re in the correct position.
2. Locate the SELECT/RESET button: Once the ignition is set to “run,” the next step is to find the SELECT/RESET button. This button is typically located on the dashboard and is used to navigate through various settings on your Honda Accord.
3. Display the oil life indicator: Press the SELECT/RESET button until the engine oil life indicator appears on the display. It may take a few presses to cycle through the different settings, so be patient until you see the oil life indicator.
4. Hold the SELECT/RESET button: Now, press and hold the SELECT/RESET button for more than 10 seconds. As you do this, both the engine oil life indicator and the maintenance code(s) will start blinking. This lets you know that you’re on the right track.
5. Release the button: After holding the button for more than 10 seconds, release it. Then, press and hold it again, but this time for more than 5 seconds. As you do this, the maintenance items code(s) will disappear, and the engine oil life will reset to 100%.
6. Verify the reset: Finally, turn the ignition off and then start the engine. This step is crucial to ensure that the indicator has been successfully reset. Take a moment to verify that the oil life indicator now shows 100%.

Remember, following these steps correctly is crucial to reset the oil life on your Honda Accord 2008 onwards. By starting with the ignition and going through each step patiently, you’ll be able to maintain your vehicle effectively.

Step 2: Display the Engine Oil Life Indicator:

Once you have turned the ignition to the run position (one position before starting the engine), it’s time to display the engine oil life indicator. Here’s how you can do it:

1. Locate the SELECT/RESET button on your Honda Accord’s dashboard. It is usually found near the speedometer or on the steering wheel.
2. Press the SELECT/RESET button repeatedly until you see the engine oil life indicator displayed on the screen. This indicator will show you the percentage of oil life remaining in your vehicle.

Steps	Instructions
Step 1	Turn the ignition to run (one position before starting the engine).
Step 2	Press the SELECT/RESET button until the engine oil life indicator is displayed.
Step 3	Press the SELECT/RESET button for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
Step 4	Press the SELECT/RESET button for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.
Step 5	Turn the ignition off and then start the engine to verify the indicator has been reset. Done.

Step 3: Reset the Engine Oil Life:

To reset the engine oil life indicator on your Honda Accord 2008 onwards, follow these simple steps:

1. Turn the ignition to the run position (one position before starting the engine).
2. Press the SELECT/RESET button repeatedly until the engine oil life indicator is displayed.
3. Press and hold the SELECT/RESET button for more than 10 seconds. You will notice that the engine oil life indicator and the maintenance code(s) start blinking.
4. Keep holding the SELECT/RESET button for more than 5 seconds. As you do this, the maintenance items code(s) will disappear, and the engine oil life will reset to 100%.
5. Finally, turn the ignition off and then start the engine to verify if the indicator has been successfully reset.

In case you need visual guidance, here is a markdown table summarizing the steps:

Step	Action
1	Turn ignition to run position
2	Press SELECT/RESET button until engine oil life indicator is displayed
3	Hold SELECT/RESET button for over 10 seconds until blinking occurs
4	Continue holding for more than 5 seconds to reset maintenance items code(s) and set oil life to 100%
5	Turn off ignition and start the engine to confirm the reset

By following these straightforward instructions, you can easily reset the engine oil life indicator on your Honda Accord 2008 onwards, keeping track of your vehicle’s maintenance needs accurately.

Step 4: Clear Maintenance Items Codes:

To clear the maintenance items codes on your Honda Accord 2008 onwards, follow these simple steps:

1. Turn the ignition to run: Before starting the engine, turn the ignition to the run position. It’s one position before actually starting the engine.
2. Press the SELECT/RESET button: Locate the SELECT/RESET button on your dashboard. Press it repeatedly until the engine oil life indicator is displayed on the screen. This will let you know that you are in the right menu.
3. Hold the SELECT/RESET button: Press and hold the SELECT/RESET button for more than 10 seconds. You will notice that the engine oil life indicator and the maintenance code(s) start to blink. This is an indication that you are now in the maintenance items codes clearing mode.
4. Press the SELECT/RESET button again: After holding the button for more than 10 seconds, press it again for more than 5 seconds. As you do this, you will see that the maintenance items code(s) disappear from the screen. At the same time, the engine oil life will reset to 100%, giving you a fresh start.
5. Verify the reset: Once you have completed the above steps, turn the ignition off. Then, start the engine again to verify if the indicator has been successfully reset. You should no longer see any maintenance codes or the engine oil life indicator.

By following these steps, you can easily clear the maintenance items codes on your Honda Accord 2008 onwards. Remember to always refer to your vehicle’s manual for any specific instructions or precautions.

Step 5: Verify the Reset:

Once you’ve followed the previous steps to reset the oil life on your Honda Accord 2008 onwards, it’s important to verify that the reset was successful. Here’s how you can do it:

1. Turn the ignition off: Before starting the engine, make sure to turn the ignition off completely. This will allow the system to reset properly.
2. Start the engine: After turning the ignition off, start the engine as you normally would. This will initiate the reset process and allow the indicator to confirm if the reset was successful.
3. Check the indicator: Once the engine is running, take a look at the engine oil life indicator on your vehicle’s dashboard. It should display a reading of 100%, indicating that the oil life has been reset.
4. Observe the maintenance items code(s): While checking the engine oil life indicator, also pay attention to any maintenance items code(s) that may have been displayed previously. If the reset was successful, these codes should disappear, confirming that the reset has been fully completed.
5. Ensure smooth operation: As you continue driving your Honda Accord, make sure to observe the engine’s performance and monitor any potential issues. A successful reset should not negatively affect the engine’s operation in any way. If you encounter any unusual behavior, it’s advisable to consult a professional mechanic.

By following these steps, you can confidently verify that the oil life on your Honda Accord 2008 onwards has been successfully reset.

This ensures that your vehicle’s engine is well-maintained and that you can continue driving with peace of mind.

Step	Instructions
1	Turn the ignition off.
2	Start the engine.
3	Check the engine oil life indicator.
4	Observe any maintenance items code(s).
5	Monitor the engine’s performance.