Mercury Grand Marquis jack Location (Explained for Beginners)

Author:

Jack Oliver

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

The Mercury Grand Marquis is a classic American sedan that has been loved by many for its spacious and comfortable interior, smooth ride, and reliable performance.

However, if you ever find yourself in a situation where you need to change a tire or perform some undercarriage maintenance, you may need to know where is the Mercury Grand Marquis jack Location.

In this article, we will explore the Mercury Grand Marquis jack location and provide you with step-by-step instructions on how to use it properly.

So, if you own a Mercury Grand Marquis or are thinking of buying one, read on to learn more about this important feature.

Table of contents

Where Is Jacking points Location On Mercury Grand Marquis jack?

If you’re wondering where the jacking points are located on your Mercury Grand Marquis jack, you’re not alone.

The jacking points are the designated places on your car’s frame where you can safely lift it with a jack without causing any damage.

On the Mercury Grand Marquis the jack is located on side wall of truck.

To locate the jack in your car, start by checking the trunk sidewalls. Look for a panel with a finger hole or handle that can be pulled down. The jack is usually found behind this panel. In case you don’t find it there, it may be mounted behind the spare tire. However, it’s more likely to be located on the sidewall as per my experience.

To locate them, you’ll need to look for the raised notches on the undercarriage, which are specifically designed for the jack to fit into.

It’s important to note that you should never jack up your car on any other part of the frame or suspension, as this can cause serious damage or injury.

Always refer to your owner’s manual for specific jacking instructions and safety precautions before attempting any work on your car’s undercarriage.

How to Locate and Use Jack 2003-2011 Mercury Grand Marquis?

What Tools You Need For Lifting your Mercury Grand Marquis:

Here’s a list of the tools you need for lifting your Mercury Grand Marquis:

1. Floor Jack:

A floor jack is essential for lifting your vehicle off the ground. Look for one with a weight capacity that can handle your car’s weight.

2. Jack Stands:

Once your car is lifted, it’s important to secure it with jack stands to prevent it from falling. Make sure the jack stands are rated to support the weight of your car.

3. Lug Wrench:

A lug wrench is necessary for loosening and tightening the lug nuts when changing a tire.

4. Socket Wrench:

A socket wrench is needed for removing bolts and nuts during repairs.

5. Torque Wrench:

A torque wrench is used to tighten bolts to a specific torque specification, ensuring they are not too loose or too tight.

6. Wheel Chocks:

Wheel chocks are used to prevent the car from rolling while it’s lifted off the ground.

7. Rubber Mallet:

A rubber mallet can be used to gently tap parts into place without causing damage.

8. Creeper:

A creeper is a rolling platform that allows you to slide under the car for repairs or maintenance.

With these tools, you’ll be able to safely and effectively lift your Mercury Grand Marquis for repairs or maintenance.

Here’s a step-by-step guide on how to locate and use the jack for a 2003-2011 Mercury Grand Marquis:

1. Locate the jack and lug wrench in the trunk of your Mercury Grand Marquis.
2. Remove the jack and lug wrench from their storage compartment.

3. Identify the lift points on the underside of the car. These are typically located near the wheels.
4. Position the jack under the lift point and ensure that it is securely in place.
5. Use the lug wrench to loosen the lug nuts on the wheel you need to remove.

6. Raise the car with the jack until the wheel is off the ground.
7. Remove the lug nuts and the wheel.
8. Replace the wheel with the spare tire.

9. Tighten the lug nuts using the lug wrench.
10. Lower the car back down to the ground.
11. Use the lug wrench to tighten the lug nuts again.

12. Store the jack, lug wrench, and replaced tire back in their storage compartment.

That’s it! Just make sure to exercise caution when using the jack and always follow the manufacturer’s instructions for safe use.

Using a hydraulic jack:

If you’re using a hydraulic jack for your Mercury Grand Marquis, there are a few additional precautions you should take.

First, make sure to bleed the jack properly before use to remove any air bubbles that may have formed. This will ensure that the jack operates smoothly and safely.
Additionally, it’s important to check the fluid level regularly to make sure it’s at the appropriate level for optimal performance.
When using a hydraulic jack, it’s also recommended to use a jack stand in addition to the jack for added safety.

This will help prevent the car from accidentally falling or shifting while it’s lifted. Always follow the manufacturer’s instructions for safe use and never exceed the weight capacity of the jack.

By taking these precautions and using the hydraulic jack correctly, you can safely and efficiently perform undercarriage maintenance on your Mercury Grand Marquis.

Using the factory-supplied jack:

The Mercury Grand Marquis comes with a single arm screw jack for emergency use, which can be found in various locations depending on the model.

It should only be used for changing a flat tire and not relied upon for extended periods of time. To use the jack, rotate the handle clockwise and exercise caution.

How to find the perfect location for Jacking your Mercury Grand Marquis?

If you’re looking for a perfect location to jack your Mercury Grand Marquis, it’s essential to follow some safety guidelines.

Firstly, ensure that the chosen area is flat, stable, and far away from traffic. Avoid jacking your car on a slope or uneven ground that may cause it to slide off.

Secondly, check if the surface is solid enough to support the weight of your car and the jack. Soft surfaces like grass or dirt may not be able to hold up the weight and may cause the car to topple over. It’s also important to use a hydraulic jack that is rated for your car’s weight and follow the manufacturer’s instructions while jacking your car.
Lastly, place wheel chocks on the opposite side of the car to prevent it from rolling away.

Following these simple steps will ensure a safe jacking experience and prevent any accidents or damages to your car.

The benefits of choosing the right location for your Mercury Grand Marquis:

Choosing the right location to jack your Mercury Grand Marquis not only ensures your safety but also helps prevent damage to your car.

Incorrectly jacking up your car can cause serious damage to the frame, suspension, and undercarriage. It can also lead to accidents and injuries if the car falls off the jack.

By following the steps mentioned above and choosing a safe and stable location, you can perform any necessary maintenance work on your car’s undercarriage without any worry.

Always remember to follow the instructions in your owner’s manual and exercise caution when using a jack or hydraulic jack.

Knowing the location of your Mercury Grand Marquis’ jack is essential for any emergency tire change or maintenance work.

By locating it correctly, using it safely, choosing a suitable location, and following manufacturer instructions, you’ll be able to avoid accidents while keeping yourself and your car out of harm’s way.

How do I find the jack on my car?

1. Refer to your car’s owner manual:

This is the first place you should look to find out where the jack is located. The manual will have detailed instructions on how to locate and use the jack.

2. Check the trunk:

Most cars come with a spare tire and a jack in the trunk. Look for a compartment or a bag that contains the jack.

3. Look under the car:

If you can’t find the jack in the trunk, it might be located under the car. Look for a small notch or groove on the underside of the car where the jack can be inserted.

4. Check the side skirts:

Some cars have side skirts that can be removed to access the jack. Look for a small panel or cover on the side of the car that can be removed.

5. Ask for help:

If you still can’t find the jack, ask a mechanic or a knowledgeable friend to help you locate it. They may have more experience with your specific car model and can give you more detailed instructions.

Conclusion and final thoughts 💭

Locating the jack on your Mercury Grand Marquis and choosing the right location to use it is crucial for performing any undercarriage maintenance or emergency tire changes.

Always refer to your car’s owner manual for detailed instructions on how to locate and use the jack safely.

Make sure to follow all safety guidelines and choose a stable, flat surface that can support the weight of your car and jack. Using a hydraulic jack in addition to a jack stand is recommended for added safety.

By following these steps, you’ll be able to perform any necessary maintenance work on your car while keeping yourself and your vehicle out of harm’s way.

Latest Posts:

About the author